Best seller 12w led panel light high brightness & surface mounted led panel from China exporter for home usage, lighted by Epistar SMD2835 LED chips, minimum 50000 hours life span, perfect for Brazil market .
Detailed technical specifications
Rated Power: 12W (Watts)
Working Voltage: 100-240V AC
Beam Angle: 120°
LED Chips: high brightness Epistar 2835 SMD led chip
Color: Warm White ( 2750K-3250K ), Natural White (3750K-4250K ), Cool White ( 5750K-6250K )
Luminous Flux: 982 lm ( Warm White ), 1006 lm (Natural White), 1062 lm (Cool White)
Enclosure material: Die-casting
Reflector: milk color PMMA
Power factor: >0.9
Saving energy: 50%
Protection Grade: IP43
Warranty: 3 years warranty
Net Weight: 0.42 KGS
1. Safety standard: SAA, RoHs, CE , FCC , GS
2. Normal luminous efficacy with >65 lm/w and excellent light uniformity.
3. All sides are lined with high brightness Epistar 2835 SMD LED chips to ensure optimal illumination.
4. High light output and reduced energy consumption up to 50%.
5. Over 36000 hours life expectancy.
6. No start-up time, no flickering, no humming.
7. High efficiency (95%) constant current driver with built in overheat protection that remains stable at a wide range of input voltages.
8. Independent LED circuit prevents complete blackout in case an LED fails.
9. Environmentally friendly, no mercury and no lead.
10. Causes no electromagnetic interference.
11. No UV, no IR
12. Warranty: 3 years warranty
- Conference & meeting rooms
- Factories & Offices
- Commercial purposes
- Residential & institution buildings
- Schools, colleges & Universities
- Places where energy saving and high color rendering index lighting are needed.
12w surface mounted led panel light high brightness dimension layout : ( measured by mm/inch )
12w surface mounted led panel light high brightness lm-80 test report
- 1.Turn off the power switch.
- 2.According to the holes of ceiling frame,drill the ceiling holes and put into the stopper,install the ceiling frame and make the AC cord out from the middle of the ceiling frame.
- 3.Connect the power cord , suction up the lamp body bead snaps into spring.
- 4.Installation completed, and you can turn on the power switch to enjoy the uniform luminous .