Project Description

Custom led panel light square 18w & Die-casting panel lamp from China, powered by SMD 2835 LED chips, minimum 5 years life span, good for France market, hot sell in 2017.

ASK FOR QUOTA

 

Detailed technical specifications

Model: LVT-PL2222-15
Rated Power: 15W (Watts)
Working Voltage: 100-240V AC
Beam Angle: 120°
LED Chips: High quality Epistar SMD2835 led chip
Color:  Warm White ( 2750K-3250K ), Natural White (3750K-4250K ), Cool White ( 5750K-6250K )
CRI: >81
Luminous Flux: 1039 lm ( Warm White ),1065 lm (Natural White), 1123 lm (Cool White)
Enclosure material: Die-casting
Reflector: milk color PMMA
Power factor: >0.9
Saving energy: 50%
Protection Grade: IP43
Warranty: 3 years warranty
Net Weight: 0.63 KGS

Features

1. Safety standard: SAA, RoHs, CE , FCC , GS
2. Normal luminous efficacy with >70 lm/w and excellent light uniformity.
3. All sides are lined with high quality Sanan SMD 2835 LED chips to ensure optimal illumination.
4. High light output and reduced energy consumption up to 50%.
5. Over 36000 hours life expectancy.
6. No start-up time, no flickering, no humming.
7. High efficiency (95%) constant current driver with built in overheat protection that remains stable at a wide range of input voltages.
8. Independent LED circuit prevents complete blackout in case an LED fails.
9. Environmentally friendly, no mercury and no lead.
10. Causes no electromagnetic interference.
11. No UV, no IR
12. Warranty: 3 years warranty

Applications:

  • Hotels
  • Conference & meeting rooms
  • Factories & Offices
  • Commercial purposes
  • Residential & institution buildings
  • Schools, colleges & Universities
  • Hospitals
  • Places where energy saving and high color rendering index lighting are needed.

18w die-casting square led panel light dimension layout : ( measured by mm/inch )

18w die-casting square led panel light dimension layout

18w die-casting square led panel light lm-80 test report

18w die-casting square led panel light lm-80 test report

18w die-casting square led panel light lm-79 light source test report

18w die-casting square led panel light lm-79 light source test report

How to install 18w die-casting square led panel light

How to install 18w die-casting square led panel light

  • 1.Turn off the power switch.
  • 2.Cut a suitable size hole in ceiling according to 18w die-casting square led panel light dimension.
  • 3.Connect the AC power cord with 18w die-casting square led panel light power supply cord.
  • 4.Push the spring on the led panel light upright and then insert the 18w die-casting square led panel light base into the ceiling hole.
  • 5.The 18w die-casting square led panel light will automatically lock rightly.
  • 6.Installation completed, and you can turn on the power switch to enjoy the uniform luminous .