Best deal 1×4 led panel light 36W & 6500K IP65 panel light from China Loevet lighting CE SAA approved, powered by Epistar LED chips, 3 years warranty, perfect for European , Australia and Asia countries.
Detailed technical specifications
Rated Power: 36W (Watts)
Working Voltage: DC 36V / AC110-240V
Beam Angle: 120°
LED Chips: high quality Epistar SMD2835 led chips
Color: Warm White ( 2750K-3250K ), Natural White (3750K-4250K ), Cool White ( 6000K-6500K )
Luminous Flux: 2854 lm ( Warm White ), 2939 lm (Natural White), 3085 lm (Cool White)
Enclosure material: Aluminum Alloy
Reflector: milk color PMMA
Power factor: >0.9
Saving energy: 50%
Protection Grade: IP65
Insulation Grade: F
Warranty: 3 years warranty
Net Weight: 3.5 KGS
1. The luminance uniformity of the emitting surface is over 80%.
2. All sides are lined with high quality Epistar SMD2835 LED chips to ensure optimal illumination.
3. High light output and reduced energy consumption of up to 50%.
4. Over 50’000 hours life expectancy.
5. Wide angle of deflection with even light distribution.
6. No start-up time, no flickering, no humming.
7. High efficiency (95%) constant current driver with built in overheat protection that remains stable at a wide range of input voltages.
8. Independent LED circuit prevents complete blackout in case an LED fails.
9. Environmentally friendly, no mercury and no lead.
10. Causes no electromagnetic interference.
11. No UV, no IR
12. Warranty: 3 years warranty
- Conference & meeting rooms
- Factories & Offices
- Commercial purposes
- Residential & institution buildings
- Schools, colleges & Universities
- Places where energy saving and high color rendering index lighting are needed.
1×4 36W ip65 6500k led panel light dimension layout : ( measured by mm/inch )
1×4 36W ip65 6500k led panel light lm-80 test report
1×4 36W ip65 6500k led panel light lm-79 light source test report
How to install 1×4 36W ip65 6500k led panel light
1.Turn off the power switch.
2.Connect the output-terminal with utility power(AC 100-240V) by using wiring unit, make certain that no copper wire is bared.
3. Connect the output-terminal DC plug of current driver with the lamp’s DC plug, insure this connection secure.
4.Put the 1×4 36W ip65 6500k led panel light and current driver to the suitable place by convenient installation.
5.Turn on the power switch.