Authentic 22w panel led & hight brightness surface mounted light from professional manufacturer with cri 90, lighted by Sanan LED chips, 3 years warranty, suitable for South Korea .
Detailed technical specifications
Rated Power: 22W (Watts)
Working Voltage: 100-240V AC
Beam Angle: 120°
LED Chips: High brightness Sanan SMD2835 led chip
Color: Warm White ( 2750K-3250K ), Natural White (3750K-4250K ), Cool White ( 5750K-6250K )
Luminous Flux: 1788 lm ( Warm White ), 1838 lm (Natural White), 1933 lm (Cool White)
Enclosure material: Die-casting
Reflector: milk color PMMA
Power factor: >0.9
Saving energy: 50%
Protection Grade: IP43
Warranty: 3 years warranty
Net Weight: 0.7 KGS
1. Safety standard: SAA, RoHs, CE , FCC , GS
2. Normal luminous efficacy with >85 lm/w and excellent light uniformity.
3. All sides are lined with high brightness Sanan SMD 2835 LED chips to ensure optimal illumination.
4. High light output and reduced energy consumption up to 50%.
5. Over 36000 hours life expectancy.
6. No start-up time, no flickering, no humming.
7. High efficiency (95%) constant current driver with built in overheat protection that remains stable at a wide range of input voltages.
8. Independent LED circuit prevents complete blackout in case an LED fails.
9. Environmentally friendly, no mercury and no lead.
10. Causes no electromagnetic interference.
11. No UV, no IR
12. Warranty: 3 years warranty
- Conference & meeting rooms
- Factories & Offices
- Commercial purposes
- Residential & institution buildings
- Schools, colleges & Universities
- Places where energy saving and high color rendering index lighting are needed.
22w high brightness surface mounted panel led dimension layout : ( measured by mm/inch )
22w high brightness surface mounted panel led lm-80 test report
22w high brightness surface mounted panel led lm-79 light source test report
How to install 22w high brightness surface mounted panel led
- 1.Turn off the power switch.
- 2.According to the holes of ceiling frame,drill the ceiling holes and put into the stopper,install the ceiling frame and make the AC cord out from the middle of the ceiling frame.
- 3.Connect the power cord , suction up the lamp body bead snaps into spring.
- 4.Installation completed, and you can turn on the power switch to enjoy the uniform luminous .