New arrival led panel 22w & surface mounted led panel light from Shenzhen Loevet Lighting Co.,ltd for indoor application, powered by Epistar SMD2835 LED chips, 3 years warranty, perfect for Russia market .
Detailed technical specifications
Rated Power: 22W (Watts)
Working Voltage: 100-240V AC
Beam Angle: 120°
LED Chips: Epistar SMD2835 led chip
Color: Warm White ( 2750K-3250K ), Natural White (3750K-4250K ), Cool White ( 5750K-6250K )
Luminous Flux: 1466 lm ( Warm White ), 1507 lm (Natural White), 1585 lm (Cool White)
Enclosure material: Die-casting
Reflector: milk color PMMA
Power factor: >0.9
Saving energy: 50%
Protection Grade: IP43
Warranty: 3 years warranty
Net Weight: 0.7 KGS
1. Safety standard: SAA, RoHs, CE , FCC , GS
2. Normal luminous efficacy with >65 lm/w and excellent light uniformity.
3. All sides are lined with Epistar SMD 2835 LED chips to ensure optimal illumination.
4. High light output and reduced energy consumption up to 50%.
5. Over 36000 hours life expectancy.
6. No start-up time, no flickering, no humming.
7. High efficiency (95%) constant current driver with built in overheat protection that remains stable at a wide range of input voltages.
8. Independent LED circuit prevents complete blackout in case an LED fails.
9. Environmentally friendly, no mercury and no lead.
10. Causes no electromagnetic interference.
11. No UV, no IR
12. Warranty: 3 years warranty
- Conference & meeting rooms
- Factories & Offices
- Commercial purposes
- Residential & institution buildings
- Schools, colleges & Universities
- Places where energy saving and high color rendering index lighting are needed.
22w surface mounted led panel light dimension layout : ( measured by mm/inch )
22w surface mounted led panel light lm-80 test report
22w surface mounted led panel light lm-79 light source test report
How to install 22w surface mounted led panel light
- 1.Turn off the power switch.
- 2.According to the holes of ceiling frame,drill the ceiling holes and put into the stopper,install the ceiling frame and make the AC cord out from the middle of the ceiling frame.
- 3.Connect the power cord , suction up the lamp body bead snaps into spring.
- 4.Installation completed, and you can turn on the power switch to enjoy the uniform luminous .