• 2x2 LED flat panel lamp 60W UL listed for commercial lighting

Project Description

2×2 LED flat panel lamp 60W UL listed for commercial lighting , suitable for hospitals, hotels, conference center, meeting room, factories, offices, schools, colleges, residential buildings etc.



Detailed technical specifications

Model: LVT-PL6060-60
Rated Power: 60W (Watts)
Working Voltage: 25.2-42V DC
Beam Angle: 120°
LED Chips: Epistar SMD2835 chip / Samsung SMD5630 chip
Color:  Warm White ( 2750K-3250K ), Natural White ( 3750K-4250K ), Cool White ( 5750K-6250K )
CRI: >80
Luminous Flux: 4759 lm ( Warm White ), 4906 lm (Natural White), 5144 lm (Cool White)
Net Weight: 4.1 KGS


1. UL Certificate No. :E471481
2. The Luminance uniformity of the emitting surface is over 82%.
3. All sides are lined with LED to ensure optimal illumination.
4. High light output and reduced energy consumption of up to 50%.
5. Over 36000 hours life expectancy.
1.Certificate No. :E471481
6. No start-up time, no flickering, no humming.
7. High efficiency (95%) constant current driver with built in overheat protection that remains
stable at a wide range of input voltages.
8. Independent LED circuit prevents complete blackout in case an LED fails.
9. Environmentally friendly, no mercury and no lead.
10. Causes no electromagnetic interference.


  • Hotels
  • Conference & meeting rooms
  • Factories & Offices
  • Commercial purposes
  • Residential & institution buildings
  • Schools, colleges & Universities
  • Hospitals
  • Places where energy saving and high color rendering index lighting are needed.

Dimensions : ( measured by mm/inch )

2x2 ft 60W UL LED Panel Light dimensions

Average Illuminance Figure

Average Illuminance Figure of 40W 2x2 ft UL LED panel light


Light Source Test Report

Light Source Test Report of 60W commercial UL LED panel light


How to install 2×2 ft 60W UL LED Panel Light

  • 2x2 LED panel light 60W installation guide1.Turn off the power switch.
  • 2.Connect the output-terminal with utility power(AC 100-277V)by using wiring unit, make certain that no copper
    wire is bared.
  • 3. Connect the output-terminal DC plug of current driver with the lamp’s DC plug, insure this connection secure.
  • 4.Put the panel light and current driver to the suitable place by convenient installation.
  • 5.Turn on the power switch.