2×4 54W CCT led panel light with 2.4G hz remote smart controller from China at low price, powered by Epistar LED chips, 5 years warranty ,for high end market .
Detailed technical specifications
Rated Power: 54W (Watts)
Working Voltage: DC 24V
Beam Angle: 120°
LED Chips: Epistar SMD2835 or SMD3014 led chips
Color: Warm White ( 2750K-3250K ), Natural White (3750K-4250K ), Cool White ( 5750K-6250K )
Luminous Flux: 4185 lm ( Warm White ), 4314 lm (Natural White), 4524 lm (Cool White)
Enclosure material: Die-casting
Reflector: milk color PMMA
Power factor: >0.9
Saving energy: 50%
Protection Grade: IP43
Warranty: 5 years warranty
Net Weight: 9.5 KGS
All light panel divided into groups can be control by one remote controller. the led panel light used together with our special controller, which can realize CCT dimmable and brightness dimmable. Color temperature can be adjusted by Control System from 6000K±250 to satisfy different color requirements. it’s completely solve the market defect of mixing color no uniform and poor.
1. Ultra-thin design, excellent uniformity, elegant button type controller.
2. Using high frequency wireless 2.4G remote control, with low power consumption, long transmission distance, strong anti-jamming capability, high air communication rate, etc.remote controller has fashion and beautiful appearance, practical simple functions.with adjustable light, color temperature, group division control synchronous.
3. Instant start, no noise, no flickering.
4. No electrical wave interference, confirm to the standard of CE.
5. No plumbum, green environment friendly, confirm to the standard of RoHS.
6. No RF interference
7. No UV, no IR
8. Warranty: 5 years warranty
- Conference & meeting rooms
- Factories & Offices
- Commercial purposes
- Residential & institution buildings
- Schools, colleges & Universities
- Places where energy saving and high color rendering index lighting are needed.
2×4 54W CCT led panel light with 2.4G hz remote smart controller dimension layout : ( measured by mm/inch )
2×4 54W CCT led panel light with 2.4G hz remote smart controller lm-80 test report
2×4 54W CCT led panel light with 2.4G hz remote smart controller lm-79 light source test report
How to install 2×4 54W CCT led panel light with 2.4G hz remote smart controller
1.Turn off the power switch.
2.Connect the output-terminal with utility power(AC 100-240V)by using wiring unit, make certain that no copper wire is bared.
3. Connect the output-terminal DC plug of current driver with the lamp’s DC plug, insure this connection secure.
4.Put the 2×4 54W CCT led panel light and current driver to the suitable place by convenient installation.
5.Turn on the power switch.