Best sell 2×4 led light panel 72W ultra bright with install kit from China supplier at affordable price, lighted by Sanan SMD2835 LED chips, minimum 7 years working life . Hot sale now !
Click edit button to change this text.
Detailed technical specifications
Rated Power: 72W (Watts)
Working Voltage: DC36V / AC110-240V
Beam Angle: 120°
LED Chips: ultra brightness Sanan SMD 2835 led chips
Color: Warm White ( 2750K-3250K ), Natural White (3750K-4250K ), Cool White ( 5750K-6250K )
Luminous Flux: 6418 lm ( Warm White ), 6618 lm (Natural White), 6937 lm (Cool White)
Enclosure material: Die-casting
Reflector: milk color PMMA
Power factor: >0.8
Saving energy: 50%
Protection Grade: IP43
Insulation Grade: F
Warranty: 3 years warranty
Net Weight: 10.4 KGS
1. The Luminance uniformity of the emitting surface is over 82%.
2. All sides are lined with ultra brightness Sanan SMD 2835 led chips to ensure optimal illumination.
3. High light output and reduced energy consumption of up to 50%.
4. Over 50’000 hours life expectancy.
5. Wide angle of deflection with even light distribution.
6. No start-up time, no flickering, no humming.
7. High efficiency (95%) constant current driver with built in overheat protection that remains
stable at a wide range of input voltages.
8. Independent LED circuit prevents complete blackout in case an LED fails.
9. Environmentally friendly, no mercury and no lead.
10. Causes no electromagnetic interference.
11. No UV, no IR
12. Warranty: 3 years warranty
- Conference & meeting rooms
- Factories & Offices
- Commercial purposes
- Residential & institution buildings
- Schools, colleges & Universities
- Places where energy saving and high color rendering index lighting are needed.
2×4 led light panel 72W ultra bright with install kit dimension layout : ( measured by mm/inch )
2×4 led light panel 72W ultra bright with install kit lm-80 test report
2×4 led light panel 72W ultra bright with install kit lm-79 light source test report
How to install 2×4 led light panel 72W ultra bright with install kit
1.Turn off the power switch.
2.Connect the output-terminal with utility power(AC 100-240V) by using wiring unit, make certain that no copper wire is bared.
3. Connect the output-terminal DC plug of current driver with the lamp’s DC plug, insure this connection secure.
4.Put the 2×4 72W ultra bright led light panel and current driver to the suitable place by convenient installation.
5.Turn on the power switch.