Fast delivery 300×300 led panel 12W IP64 & bathroom panel light from professional China manufacturer for home usage, lighted by Sanan SMD2835 LED chips, minimum 50000 hours life span, perfect for United Kingdom market .
Detailed technical specifications
Rated Power: 12W (Watts)
Working Voltage: DC 36V / AC110-240V
Beam Angle: 120°
LED Chips: Sanan SMD2835 led chips
Color: Warm White ( 2750K-3250K ), Natural White (3750K-4250K ), Cool White ( 5750K-6250K )
Luminous Flux: 864 lm ( Warm White ), 885 lm (Natural White), 934 lm (Cool White)
Enclosure material: Die-casting
Reflector: milk color PMMA
Power factor: >0.9
Saving energy: 50%
Protection Grade: IP64
Warranty: 3 years warranty
Net Weight: 1.35 KGS
1. The Luminance uniformity of the emitting surface is over 80%.
2. All sides are lined with Sanan SMD2835 led chips to ensure optimal illumination.
3. High light output and reduced energy consumption of up to 50%.
4. Over 50’000 hours life expectancy.
5. Wide angle of deflection with even light distribution.
6. No start-up time, no flickering, no humming.
7. High efficiency (95%) constant current driver with built in overheat protection that remains
stable at a wide range of input voltages.
8. Independent LED circuit prevents complete blackout in case an LED fails.
9. Environmentally friendly, no mercury and no lead.
10. Causes no electromagnetic interference.
11. No UV, no IR
12. Warranty: 3 years warranty
- Conference & meeting rooms
- Factories & Offices
- Commercial purposes
- Residential & institution buildings
- Schools, colleges & Universities
- Places where energy saving and high color rendering index lighting are needed.
12w 300×300 IP64 bathroom led panel light dimension layout : ( measured by mm/inch )
12w 300×300 IP64 bathroom led panel light lm-80 test report
12w 300×300 IP64 bathroom led panel light lm-79 light source test report
How to install 12w 300×300 IP64 bathroom led panel light
1.Turn off the power switch.
2.Connect the output-terminal with utility power(AC 100-240V) by using wiring unit, make certain that no copper wire is bared.
3. Connect the output-terminal DC plug of current driver with the lamp’s DC plug, insure this connection secure.
4.Put the 12W 300×300 IP64 led panel and current driver to the suitable place by convenient installation.
5.Turn on the power switch.