Project Description

Authentic 30×60 led panel 27W & Australia panel light from China manufacturer for commercial lighting, 3 years warranty, good for Australia market , hot sell in 2017.

ASK FOR QUOTA

 

Detailed technical specifications

Model:LVT-PL3060-N27
Rated Power: 27W (Watts)
Working Voltage: DC 36V / AC110-240V
Beam Angle: 120°
LED Chips: high quality Epistar SMD2835 led chips
Color:  Warm White ( 2750K-3250K ), Natural White (3750K-4250K ), Cool White ( 5750K-6250K )
CRI: >80
Luminous Flux: 2106 lm ( Warm White ), 2167 lm (Natural White), 2277 lm (Cool White)
Enclosure material: Die-casting
Reflector: milk color PMMA
Power factor: >0.9
Saving energy: 50%
Protection Grade: IP43
Warranty: 3 years warranty
Net Weight: 2.7 KGS

Features

1. The Luminance uniformity of the emitting surface is over 80%.
2. All sides are lined with high quality Epistar SMD2835 led chips to ensure optimal illumination.
3. High light output and reduced energy consumption of up to 50%.
4. Over 50’000 hours life expectancy.
5. Wide angle of deflection with even light distribution.
6. No start-up time, no flickering, no humming.
7. High efficiency (95%) constant current driver with built in overheat protection that remains
stable at a wide range of input voltages.
8. Independent LED circuit prevents complete blackout in case an LED fails.
9. Environmentally friendly, no mercury and no lead.
10. Causes no electromagnetic interference.
11. No UV, no IR
12. Warranty: 3 years warranty

Applications:

  • Hotels
  • Conference & meeting rooms
  • Factories & Offices
  • Commercial purposes
  • Residential & institution buildings
  • Schools, colleges & Universities
  • Hospitals
  • Places where energy saving and high color rendering index lighting are needed.

30×60 led panel 27W dimension layout : ( measured by mm/inch )

30x60 led panel 27W dimension layout

30×60 led panel 27W lm-80 test report

30x60 led panel 27W lm-80 test report

30×60 led panel 27W lm-79 light source test report

30x60 led panel 27W lm-79 light source test report

How to install 30×60 led panel 27W

How to install 30x60 led panel 27W

1.Turn off the power switch.
2.Connect the output-terminal with utility power(AC 100-240V) by using wiring unit, make certain that no copper wire is bared.
3. Connect the output-terminal DC plug of current driver with the lamp’s DC plug, insure this connection secure.
4.Put the 30×60 led panel 27W and current driver to the suitable place by convenient installation.
5.Turn on the power switch.