Project Description

Energy saving panel led 30×120 42W & 5000K daylight led panel from Loevet lighting, powered by Epistar LED chips, with mild light, suitable for shop, office etc



Detailed technical specifications

Rated Power: 42W (Watts)
Working Voltage: DC 36V / AC110-240V
Beam Angle: 120°
LED Chips: High quality Epistar SMD2835 led chips
Color:  Warm White ( 2750K-3250K ), Natural White (3750K-4250K ), Cool White ( 5750K-6250K )
CRI: >80
Luminous Flux: 3743 lm ( Warm White ), 3856 lm (Natural White), 4046 lm (Cool White)
Enclosure material: Die-casting
Reflector: milk color PMMA
Power factor: >0.8
Saving energy: 50%
Protection Grade: IP43
Insulation Grade: F
Warranty: 3 years warranty
Net Weight: 4.3 KGS


1. The Luminance uniformity of the emitting surface is over 82%.
2. All sides are lined with LED to ensure optimal illumination.
3. High light output and reduced energy consumption of up to 50%.
4. Over 50’000 hours life expectancy.
5. Wide angle of deflection with even light distribution.
6. No start-up time, no flickering, no humming.
7. High efficiency (95%) constant current driver with built in overheat protection that remains
stable at a wide range of input voltages.
8. Independent LED circuit prevents complete blackout in case an LED fails.
9. Environmentally friendly, no mercury and no lead.
10. Causes no electromagnetic interference.
11. No UV, no IR
12. Warranty: 3 years warranty


  • Hotels
  • Conference & meeting rooms
  • Factories & Offices
  • Commercial purposes
  • Residential & institution buildings
  • Schools, colleges & Universities
  • Hospitals
  • Places where energy saving and high color rendering index lighting are needed.

5000k daylight panel led 30×120 42W dimension layout : ( measured by mm/inch )

5000k daylight panel led 30x120 42W dimension layout

5000k daylight panel led 30×120 42W lm-80 test report

5000k daylight panel led 30x120 42W lm-80 test report

5000k daylight panel led 30×120 42W lm-79 light source test report
5000k daylight panel led 30x120 42W lm-79 light source test report

How to install 5000k daylight 30×120 42W panel led

How to install 5000k daylight 30x120 42W panel led 

1.Turn off the power switch.
2.Connect the output-terminal with utility power(AC 100-240V) by using wiring unit, make certain that no copper wire is bared.
3. Connect the output-terminal DC plug of current driver with the lamp’s DC plug, insure this connection secure.
4.Put the 5000k daylight 30×120 42w panel led and current driver to the suitable place by convenient installation.
5.Turn on the power switch.