2×4 led panel 54W & 6000K regular brightness led panel light 95 lm/w from Shenzhen China for business or public lighting, lighted by Epistar LED chips, 3 years warranty .
Detailed technical specifications
Rated Power: 54W (Watts)
Working Voltage: DC36V / AC110-240V
Beam Angle: 120°
LED Chips: High quality Epistar SMD2835 led chips
Color: Warm White ( 2750K-3250K ), Natural White (3750K-4250K ), Cool White ( 5750K-6250K )
Luminous Flux: 4785 lm ( Warm White ), 4932 lm (Natural White), 5172 lm (Cool White)
Enclosure material: Die-casting
Reflector: milk color PMMA
Power factor: >0.8
Saving energy: 50%
Protection Grade: IP43
Insulation Grade: F
Warranty: 3 years warranty
Net Weight: 10.4 KGS
1. The Luminance uniformity of the emitting surface is over 82%.
2. All sides are lined with LED to ensure optimal illumination.
3. High light output and reduced energy consumption of up to 50%.
4. Over 50’000 hours life expectancy.
5. Wide angle of deflection with even light distribution.
6. No start-up time, no flickering, no humming.
7. High efficiency (95%) constant current driver with built in overheat protection that remains
stable at a wide range of input voltages.
8. Independent LED circuit prevents complete blackout in case an LED fails.
9. Environmentally friendly, no mercury and no lead.
10. Causes no electromagnetic interference.
11. No UV, no IR
12. Warranty: 3 years warranty
- Conference & meeting rooms
- Factories & Offices
- Commercial purposes
- Residential & institution buildings
- Schools, colleges & Universities
- Places where energy saving and high color rendering index lighting are needed.
6000K 54W regular brightness 2×4 led panel light dimension layout : ( measured by mm/inch )
6000K 54W regular brightness 2×4 led panel light 95 lm/w lm-80 test report
6000K 54W regular brightness 2×4 led panel light lm-79 light source test report
How to install 6000K 54W regular brightness 2×4 led panel light
1.Turn off the power switch.
2.Connect the output-terminal with utility power(AC 100-240V) by using wiring unit, make certain that no copper wire is bared.
3. Connect the output-terminal DC plug of current driver with the lamp’s DC plug, insure this connection secure.
4.Put the 6000K 54W regular brightness 2×4 led panel light and current driver to the suitable place by convenient installation.
5.Turn on the power switch.