Project Description

Dali Dimmable LED Panel Lights

ASK FOR QUOTA

Description

(1) Output current level selectable by DIP S.W
(2) 180~295VAC input only.
(3) Dali dimmable LED Panel Light Built-in active PFC function.
(4) Protections: Short circuit / Over voltage / Over temperature.
(5) Cooling by free air convection Dali dimmable LED Panel Light.
(6) Dali dimmable LED Panel Light Fully isolated plastic case.
(7) ClassⅡpower unit, no FG.
(8) Built-in DALI interface and push dimming function.
(9) Optional 12V/50mA auxiliary output.
(10) IP20 design.
(11) Logarithm or linear dimming curve selectable.
(12) Temperature compensation function by external NTC.
(13) No load power consumption <0.5W.
(14) Power supplies synchronization function up to 10 units..
(15) Suitable for indoor LED lighting applications.
(16) 3 years warranty.

View detail specifications of

Dali Dimmable LED Panel Lights

TECHNICAL SPECIFICATIONS

Selectable Current: 350-1050mA 500-1400mA
DC voltage range: 2-100V 2-90V
Rated Power: 26~40W 42~60W
Ripple Current: ±5%
Ripple & Noise(max.): 700mVp-p
No-load Output Voltage(max.): 110V
Current Accuracy: ±5%
Setup, Rise Time: 500ms, 80ms / 230VAC at rated power
Hold Up Time: 16ms/230VAC at rated power
Voltage Range: 180 ~ 295VAC 254 ~ 417VDC
Frequency Range: 47 ~ 63Hz
Power Factor(Typ.): PF≧0.975/230VAC, PF≧0.96/277VAC at rated power
Total Harmonic Distortion: THD will be lower than 20% when output loading is 75% or higher
Efficiency(Typ.): 91%
AC Current(Typ.): 0.23A/230VAC
Inrush Current(Typ.) COLD START 20A(twidth=260μs measured at 50% Ipeak) at 230VAC
Leakage Current: <0.5mA / 240VAC
Short Circuit: Constant current limiting, recovers automatically after fault is removed
Over Voltage: 110 ~ 130V
Over Temperature: Shut down o/p voltage, re-power on to recover
Auxiliary Power(optional): 12V @ 50mA for driving fan; Tolerance ±5%
Temp.Compensation: By external NTC(not provide with the power supply)
Working Temp.: -30 ~ +60℃ (Refer to “Derating Curve”)
Working Humidity: 20 ~ 90% RH non-condensing
Storage Temp.,Humidity: -40 ~ +80℃, 10 ~ 95% RH
Safety Standards: UL8750, ENEC, GB19510.14,GB19510.1 approved
DALI Standards: Comply with IEC62386-101, 102, 207
Withstand Voltage.: I/P-O/P:3.75KVAC
EMC Emission: Compliance to ENEC;Class C;GB17625.1,GB17743