Project Description
Dali Dimmable LED Panel Lights
Description
(1) Output current level selectable by DIP S.W
(2) 180~295VAC input only.
(3) Dali dimmable LED Panel Light Built-in active PFC function.
(4) Protections: Short circuit / Over voltage / Over temperature.
(5) Cooling by free air convection Dali dimmable LED Panel Light.
(6) Dali dimmable LED Panel Light Fully isolated plastic case.
(7) ClassⅡpower unit, no FG.
(8) Built-in DALI interface and push dimming function.
(9) Optional 12V/50mA auxiliary output.
(10) IP20 design.
(11) Logarithm or linear dimming curve selectable.
(12) Temperature compensation function by external NTC.
(13) No load power consumption <0.5W.
(14) Power supplies synchronization function up to 10 units..
(15) Suitable for indoor LED lighting applications.
(16) 3 years warranty.
View detail specifications of
Dali Dimmable LED Panel Lights
TECHNICAL SPECIFICATIONS
Selectable Current: | 500-1400mA |
DC voltage range: | 2-90V |
Rated Power: | 42~60W |
Ripple Current: | ±5% |
Ripple & Noise(max.): | 700mVp-p |
No-load Output Voltage(max.): | 110V |
Current Accuracy: | ±5% |
Setup, Rise Time: | 500ms, 80ms / 230VAC at rated power |
Hold Up Time: | 16ms/230VAC at rated power |
Voltage Range: | 180 ~ 295VAC 254 ~ 417VDC |
Frequency Range: | 47 ~ 63Hz |
Power Factor(Typ.): | PF≧0.975/230VAC, PF≧0.96/277VAC at rated power |
Total Harmonic Distortion: | THD will be lower than 20% when output loading is 75% or higher |
Efficiency(Typ.): | 91% |
AC Current(Typ.): | 0.23A/230VAC |
Inrush Current(Typ.) | COLD START 20A(twidth=260μs measured at 50% Ipeak) at 230VAC |
Leakage Current: | <0.5mA / 240VAC |
Short Circuit: | Constant current limiting, recovers automatically after fault is removed |
Over Voltage: | 110 ~ 130V |
Over Temperature: | Shut down o/p voltage, re-power on to recover |
Auxiliary Power(optional): | 12V @ 50mA for driving fan; Tolerance ±5% |
Temp.Compensation: | By external NTC(not provide with the power supply) |
Working Temp.: | -30 ~ +60℃ (Refer to “Derating Curve”) |
Working Humidity: | 20 ~ 90% RH non-condensing |
Storage Temp.,Humidity: | -40 ~ +80℃, 10 ~ 95% RH |
Safety Standards: | UL8750, ENEC, GB19510.14,GB19510.1 approved |
DALI Standards: | Comply with IEC62386-101, 102, 207 |
Withstand Voltage.: | I/P-O/P:3.75KVAC |
EMC Emission: | Compliance to ENEC;Class C;GB17625.1,GB17743 |