Latest square panel led 10w & Die-cast led panel bulb from Loevet lighting for household usage, minimum 50000 hours life span, perfect for Amazon seller.
Detailed technical specifications
Rated Power: 10W (Watts)
Working Voltage: 100-240V AC
Beam Angle: 120°
LED Chips: High quality Sanan SMD2835 led chip
Color: Warm White ( 2750K-3250K ), Natural White (3750K-4250K ), Cool White ( 5750K-6250K )
Luminous Flux: 689 lm ( Warm White ), 704 lm (Natural White), 745 lm (Cool White)
Enclosure material: Die-casting
Reflector: milk color PMMA
Power factor: >0.9
Saving energy: 50%
Protection Grade: IP43
Warranty: 5 years warranty
Net Weight: 0.47 KGS
1. Safety standard: SAA, RoHs, CE , FCC , GS
2. Normal luminous efficacy with >65 lm/w and excellent light uniformity.
3. All sides are lined with high quality Sanan SMD 2835 LED chips to ensure optimal illumination.
4. High light output and reduced energy consumption up to 50%.
5. Over 36000 hours life expectancy.
6. No start-up time, no flickering, no humming.
7. High efficiency (95%) constant current driver with built in overheat protection that remains stable at a wide range of input voltages.
8. Independent LED circuit prevents complete blackout in case an LED fails.
9. Environmentally friendly, no mercury and no lead.
10. Causes no electromagnetic interference.
11. No UV, no IR
12. Warranty: 5 years warranty
- Conference & meeting rooms
- Factories & Offices
- Commercial purposes
- Residential & institution buildings
- Schools, colleges & Universities
- Places where energy saving and high color rendering index lighting are needed.
Die-cast 10w square panel led bulb dimension layout : ( measured by mm/inch )
Die-cast 10w square panel led bulb lm-80 test report
Die-cast 10w square panel led bulb lm-79 light source test report
How to install Die-cast 10w square panel led bulb
- 1.Turn off the power switch.
- 2.Cut a suitable size hole in ceiling according to Die-cast 10w square panel led bulb dimension.
- 3.Connect the AC power cord with Die-cast 10w square panel led bulb power supply cord.
- 4.Push the spring on the led panel light upright and then insert the Die-cast 10w square panel led bulb base into the ceiling hole.
- 5.The Die-cast 10w square panel led bulb will automatically lock rightly.
- 6.Installation completed, and you can turn on the power switch to enjoy the uniform luminous .