Project Description

Energy Saving round panel 8w & Die-casting led panel light from China with good quality, with Epistar SMD2835 LED chips, 5 years warranty , suitable for Japan market.

ASK FOR QUOTA

 

Detailed technical specifications

Model: LVT-DL145-R8
Rated Power: 8W (Watts)
Working Voltage: 100-240V AC
Beam Angle: 120°
LED Chips: Epistar SMD2835 chip
Color:  Warm White ( 2750K-3250K ), Natural White (3750K-4250K ), Cool White ( 5750K-6250K )
CRI: >80
Luminous Flux: 536 lm ( Warm White ), 547 lm (Natural White), 580 lm (Cool White)
Enclosure material: Die-casting
Reflector: milk color PMMA
Power factor: >0.9
Saving energy: 50%
Protection Grade: IP43
Warranty: 5 years warranty
Net Weight: 0.23 KGS

Features

1. Safety standard: SAA, RoHs, CE , PSE
2. Normal luminous efficacy with >70lm/w and excellent light uniformity.
3. All sides are lined with Epistar 2835 LED chips to ensure optimal illumination.
4. High light output and reduced energy consumption up to 50%.
5. Over 36’000 hours life expectancy.
6. No start-up time, no flickering, no humming.
7. High efficiency (95%) constant current driver with built in overheat protection that remains stable at a wide range of input voltages.
8. Independent LED circuit prevents complete blackout in case an LED fails.
9. Environmentally friendly, no mercury and no lead.
10. Causes no electromagnetic interference.
11. No UV, no IR
12. Warranty: 5 years warranty

Applications:

  • Hotels
  • Conference & meeting rooms
  • Factories & Offices
  • Commercial purposes
  • Residential & institution buildings
  • Schools, colleges & Universities
  • Hospitals
  • Places where energy saving and high color rendering index lighting are needed.

Dimensions : ( measured by mm/inch )

Die-casting round led panel light 8W dimension layout

 

Average Illuminance Figure

Die-casting round led panel light 8W lumen 80 test report

Light Source Test Report

Die-casting round led panel light 8W lighting source test report

How to install 8W Die-casting round led panel light

How to install 8W Die-casting round led panel light

  • 1.Turn off the power switch.
  • 2.Cut a suitable size hole in ceiling according to 6w high brightness round led panel dimension.
  • 3.Connect the led panel light with the included led panel light power supply,
  • 4.Push the spring on the led panel light upright and then insert the led panel light base into the ceiling hole, it will aromatically lock rightly.
  • 5.Turn on the power switch.