LED 2×2 panel 72W and high quality panel light for United Kingdom from professional China manufacturer for commercial lighting, can work up to 25 years, suitable for UK and other Europe countries such as Germany, France, Italy, Spain, Sweden, Switzerland etc .
Detailed technical specifications
Rated Power: 72W (Watts)
Working Voltage: DC 36V / AC110-240V
Beam Angle: 120°
LED Chips: high brightness Sanan SMD2835 led chips
Color: Warm White ( 2750K-3250K ), Natural White (3750K-4250K ), Cool White ( 5750K-6250K )
Luminous Flux: 6685 lm ( Warm White ), 6893 lm (Natural White), 7226 lm (Cool White)
Enclosure material: Die-casting
Reflector: milk color PMMA
Power factor: >0.9
Saving energy: 50%
Protection Grade: IP43
Insulation Grade: F
Warranty: 3 years warranty
Net Weight: 4.6 KGS
1. The Luminance uniformity of the emitting surface is over 80%.
2. All sides are lined with high brightness Sanan SMD2835 led chips to ensure optimal illumination.
3. High light output and reduced energy consumption of up to 50%.
4. Over 50’000 hours life expectancy.
5. Wide angle of deflection with even light distribution.
6. No start-up time, no flickering, no humming.
7. High efficiency (95%) constant current driver with built in overheat protection that remains
stable at a wide range of input voltages.
8. Independent LED circuit prevents complete blackout in case an LED fails.
9. Environmentally friendly, no mercury and no lead.
10. Causes no electromagnetic interference.
11. No UV, no IR
12. Warranty: 3 years warranty
- Conference & meeting rooms
- Factories & Offices
- Commercial purposes
- Residential & institution buildings
- Schools, colleges & Universities
- Places where energy saving and high color rendering index lighting are needed.
72w high quality led 2×2 panel light dimension layout : ( measured by mm/inch )
72w high quality led 2×2 panel light lm-80 test report
72w high quality led 2×2 panel light lm-79 light source test report
How to install 72w high quality led 2×2 panel light
1.Turn off the power switch.
2.Connect the output-terminal with utility power(AC 100-240V) by using wiring unit, make certain that no copper wire is bared.
3. Connect the output-terminal DC plug of current driver with the lamp’s DC plug, insure this connection secure.
4.Put the 72w high quality led 2×2 panel light and current driver to the suitable place by convenient installation.
5.Turn on the power switch.