Direct sale 1×2 led panel light 36w & IP64 6000K panel lamp from China supplier, powered by SMD 5630 Samsung LED chips, 3 years warranty, good for US market .
Detailed technical specifications
Rated Power: 36W (Watts)
Working Voltage: DC 24V / AC110-240V
Beam Angle: 120°
LED Chips: High quality Samsung SMD5630 led chips
Color: Warm White ( 2750K-3250K ), Natural White (3750K-4250K ), Cool White ( 5750K-6250K )
Luminous Flux: 2924 lm ( Warm White ), 3011 lm (Natural White), 3160 lm (Cool White)
Enclosure material: Die-casting
Reflector: milk color PMMA
Power factor: >0.9
Saving energy: 50%
Protection Grade: IP64
Insulation Grade: F
Warranty: 3 years warranty
Net Weight: 2.2 KGS
1. The Luminance uniformity of the emitting surface is over 80%.
2. All sides are lined with high quality Samsung SMD5630 led chips to ensure optimal illumination.
3. High light output and reduced energy consumption of up to 50%.
4. Over 50’000 hours life expectancy.
5. Wide angle of deflection with even light distribution.
6. No start-up time, no flickering, no humming.
7. High efficiency (95%) constant current driver with built in overheat protection that remains
stable at a wide range of input voltages.
8. Independent LED circuit prevents complete blackout in case an LED fails.
9. Environmentally friendly, no mercury and no lead.
10. Causes no electromagnetic interference.
11. No UV, no IR
12. Warranty: 3 years warranty
- Conference & meeting rooms
- Factories & Offices
- Commercial purposes
- Residential & institution buildings
- Schools, colleges & Universities
- Places where energy saving and high color rendering index lighting are needed.
IP64 1×2 led panel light 36w dimension layout : ( measured by mm/inch )
IP64 1×2 led panel light 36w lm-80 test report
IP64 1×2 led panel light 36w lm-79 light source test report
How to install IP64 1×2 led panel light 36w
1.Turn off the power switch.
2.Connect the output-terminal with utility power(AC 100-240V) by using wiring unit, make certain that no copper wire is bared.
3. Connect the output-terminal DC plug of current driver with the lamp’s DC plug, insure this connection secure.
4.Put the IP64 1×2 led panel light 36w and current driver to the suitable place by convenient installation.
5.Turn on the power switch.