Best seller led flat panel ceiling light 36W & IP64 led panel light from China factory for indoor lighting, powered by Sanan high brightness SMD2835 LED chips, minimum 7 years life span, perfect for Brazil market, hot sale for 2017 .
Detailed technical specifications
Rated Power: 36W (Watts)
Working Voltage: DC 36V / AC110-240V
Beam Angle: 120°
LED Chips: high brightness Sanan SMD2835 led chips
Color: Warm White ( 2750K-3250K ), Natural White (3750K-4250K ), Cool White ( 5750K-6250K )
Luminous Flux: 3407 lm ( Warm White ), 3509 lm (Natural White), 3683 lm (Cool White)
Enclosure material: Die-casting
Reflector: milk color PMMA
Power factor: >0.9
Saving energy: 50%
Protection Grade: IP64
Warranty: 3 years warranty
Net Weight: 1.35 KGS
1. The Luminance uniformity of the emitting surface is over 80%.
2. All sides are lined with high brightness Sanan SMD2835 led chips to ensure optimal illumination.
3. High light output and reduced energy consumption of up to 50%.
4. Over 50’000 hours life expectancy.
5. Wide angle of deflection with even light distribution.
6. No start-up time, no flickering, no humming.
7. High efficiency (95%) constant current driver with built in overheat protection that remains
stable at a wide range of input voltages.
8. Independent LED circuit prevents complete blackout in case an LED fails.
9. Environmentally friendly, no mercury and no lead.
10. Causes no electromagnetic interference.
11. No UV, no IR
12. Warranty: 3 years warranty
- Conference & meeting rooms
- Factories & Offices
- Commercial purposes
- Residential & institution buildings
- Schools, colleges & Universities
- Places where energy saving and high color rendering index lighting are needed.
IP64 led flat panel ceiling light 36W dimension layout : ( measured by mm/inch )
IP64 led flat panel ceiling light 36W lm-80 test report
IP64 led flat panel ceiling light 36W lm-79 light source test report
How to install IP64 led flat panel ceiling light 36W
1.Turn off the power switch.
2.Connect the output-terminal with utility power(AC 100-240V) by using wiring unit, make certain that no copper wire is bared.
3. Connect the output-terminal DC plug of current driver with the lamp’s DC plug, insure this connection secure.
4.Put the IP64 led flat panel ceiling light 36W and current driver to the suitable place by convenient installation.
5.Turn on the power switch.