New arrival led 60×60 54W & waterproof panel light for Vietnam from China manufacturer with top quality, lighted by Sanan SMD2835 LED chips, minimum 7 years working life.
Detailed technical specifications
Rated Power: 54W (Watts)
Working Voltage: DC 36V / AC110-240V
Beam Angle: 120°
LED Chips: High quality Sanan SMD2835 led chips
Color: Warm White ( 2750K-3250K ), Natural White (3750K-4250K ), Cool White ( 5750K-6250K )
Luminous Flux: 4266 lm ( Warm White ), 4397 lm (Natural White), 4661 lm (Cool White)
Enclosure material: Die-casting
Reflector: milk color PMMA
Power factor: >0.9
Saving energy: 50%
Protection Grade: IP64
Insulation Grade: F
Warranty: 3 years warranty
Net Weight: 4.1 KGS
1. The Luminance uniformity of the emitting surface is over 80%.
2. All sides are lined with high quality Sanan SMD2835 led chips to ensure optimal illumination.
3. High light output and reduced energy consumption of up to 50%.
4. Over 50’000 hours life expectancy.
5. Wide angle of deflection with even light distribution.
6. No start-up time, no flickering, no humming.
7. High efficiency (95%) constant current driver with built in overheat protection that remains
stable at a wide range of input voltages.
8. Independent LED circuit prevents complete blackout in case an LED fails.
9. Environmentally friendly, no mercury and no lead.
10. Causes no electromagnetic interference.
11. No UV, no IR
12. Warranty: 3 years warranty
- Conference & meeting rooms
- Factories & Offices
- Commercial purposes
- Residential & institution buildings
- Schools, colleges & Universities
- Places where energy saving and high color rendering index lighting are needed.
led 60×60 panel light 54W waterproof dimension layout : ( measured by mm/inch )
led 60×60 panel light 54W waterproof lm-80 test report
led 60×60 panel light 54W waterproof lm-79 light source test report
How to install led 60×60 panel light 54W waterproof
1.Turn off the power switch.
2.Connect the output-terminal with utility power(AC 100-240V) by using wiring unit, make certain that no copper wire is bared.
3. Connect the output-terminal DC plug of current driver with the lamp’s DC plug, insure this connection secure.
4.Put the 54w waterproof led 60×60 panel light and current driver to the suitable place by convenient installation.
5.Turn on the power switch.