Project Description

Fashion led panel 30x60cm 36W & SAA approved light panel from China exporter, powered by Samsung LED chips, 5 years warranty , good for Australia, hot sell now.

ASK FOR QUOTA

 

Detailed technical specifications

Model:LVT-PL3060-N36
Rated Power: 36W (Watts)
Working Voltage: DC 36V / AC110-240V
Beam Angle: 120°
LED Chips: Samsung SMD5630 led chips
Color:  Warm White ( 2750K-3250K ), Natural White (3750K-4250K ), Cool White ( 5750K-6250K )
CRI: >80
Luminous Flux: 2810 lm ( Warm White ), 2894 lm (Natural White), 3038 lm (Cool White)
Enclosure material: Die-casting
Reflector: milk color PMMA
Power factor: >0.9
Saving energy: 50%
Protection Grade: IP43
Warranty: 3 years warranty
Net Weight: 2.7 KGS

Features

1. The Luminance uniformity of the emitting surface is over 80%.
2. All sides are lined with Samsung SMD5630 led chips to ensure optimal illumination.
3. High light output and reduced energy consumption of up to 50%.
4. Over 50’000 hours life expectancy.
5. Wide angle of deflection with even light distribution.
6. No start-up time, no flickering, no humming.
7. High efficiency (95%) constant current driver with built in overheat protection that remains
stable at a wide range of input voltages.
8. Independent LED circuit prevents complete blackout in case an LED fails.
9. Environmentally friendly, no mercury and no lead.
10. Causes no electromagnetic interference.
11. No UV, no IR
12. Warranty: 3 years warranty

Applications:

  • Hotels
  • Conference & meeting rooms
  • Factories & Offices
  • Commercial purposes
  • Residential & institution buildings
  • Schools, colleges & Universities
  • Hospitals
  • Places where energy saving and high color rendering index lighting are needed.

SAA approved led light panel 30x60cm 36W dimension layout : ( measured by mm/inch )

SAA approved led light panel 30x60cm 36W dimension layout

SAA approved led light panel 30x60cm 36W lm-80 test report

SAA approved led light panel 30x60cm 36W lm-80 test report

SAA approved led light panel 30x60cm 36W lm-79 light source test report

SAA approved led light panel 30x60cm 36W lm-79 light source test report

How to install SAA approved led light panel 30x60cm 36W

How to install SAA approved led light panel 30x60cm 36W

1.Turn off the power switch.
2.Connect the output-terminal with utility power(AC 100-240V) by using wiring unit, make certain that no copper wire is bared.
3. Connect the output-terminal DC plug of current driver with the lamp’s DC plug, insure this connection secure.
4.Put the SAA approved led light panel 30x60cm 36W and current driver to the suitable place by convenient installation.
5.Turn on the power switch.