Project Description

Easy installation Round led light 12W UL listed from China exporter for home lighting, powered by SMD 2835 Epistar LED chips, 5 years warranty , suitable for USA market, hot sell in 2017 .

ASK FOR QUOTA

 

Detailed technical specifications

Model: LVT-DL180-12
Rated Power: 12W (Watts)
Working Voltage: 9-36V DC
Beam Angle: 120°
LED Chips: Epistar SMD2835 chip
Color:  Warm White ( 2800K-3500K ), Natural White (3800K-4500K ), Cool White ( 5800K-6500K )
CRI: >80
Luminous Flux: 815 lm ( Warm White ), 834 lm (Natural White), 881 lm (Cool White)
Enclosure material: Die-casting
Reflector: milk color PMMA
Power factor: >0.9
Saving energy: 50%
Protection Grade: IP40
Warranty: 3-5 years warranty
Net Weight: 0.31 KGS

Features

1. Safety standard: SAA, RoHs, CE, UL .
2. Normal luminous efficacy with >60lm/w and excellent light uniformity.
3. All sides are lined with LED to ensure optimal illumination.
4. High light output and reduced energy consumption of up to 50%.
5. Over 36’000 hours life expectancy.
1.Certificate No. :E471481
6. No start-up time, no flickering, no humming.
7. High efficiency (95%) constant current driver with built in overheat protection that remains stable at a wide range of input voltages.
8. Independent LED circuit prevents complete blackout in case an LED fails.
9. Environmentally friendly, no mercury and no lead.
10. Causes no electromagnetic interference.
11. No UV, no IR
12. Warranty: 3-5 years warranty

Applications:

  • Hotels
  • Conference & meeting rooms
  • Factories & Offices
  • Commercial purposes
  • Residential & institution buildings
  • Schools, colleges & Universities
  • Hospitals
  • Places where energy saving and high color rendering index lighting are needed.

Dimensions : ( measured by mm/inch )

round led light 12W UL listed dimension layout

Average Illuminance Figure

round led light 12W UL listed lumen report

Light Source Test Report

round led light 12W UL listed lighting source test

How to install UL listed 12w round led light

how to install round led light 12W UL listed

  • 1.Turn off the power switch.
  • 2.Cut a suitable size hole in ceiling according to mini square led panel light dimension.
  • 3.Screw out the 4 screws on the built-in power supply upper cover.
  • 4.Pull out the upper cover of the power supply towards upright direction.
  • 5.Guide the grid electricity wires into the power supply box,connect the grid electricity wire with power supply wires with screw end cap, and then close the power supply box properly with screws.
  • 6.Push the spring on the led panel light upright and then insert the led panel light base into the ceiling hole, it will aromaticallylock rightly.