Project Description

Easy installation Round led light 12W UL listed from China exporter for home lighting, powered by SMD 2835 Epistar LED chips, 5 years warranty , suitable for USA market, hot sell in 2017 .

Detailed technical specifications

Model: LVT-DL180-12
Rated Power: 12W (Watts)
Working Voltage: 9-36V DC
Beam Angle: 120°
LED Chips: Epistar SMD2835 chip
Color:  Warm White ( 2800K-3500K ), Natural White (3800K-4500K ), Cool White ( 5800K-6500K )
CRI: >80
Luminous Flux: 815 lm ( Warm White ), 834 lm (Natural White), 881 lm (Cool White)
Enclosure material: Die-casting
Reflector: milk color PMMA
Power factor: >0.9
Saving energy: 50%
Protection Grade: IP40
Warranty: 3-5 years warranty
Net Weight: 0.31 KGS


1. Safety standard: SAA, RoHs, CE, UL .
2. Normal luminous efficacy with >60lm/w and excellent light uniformity.
3. All sides are lined with LED to ensure optimal illumination.
4. High light output and reduced energy consumption of up to 50%.
5. Over 36’000 hours life expectancy.
1.Certificate No. :E471481
6. No start-up time, no flickering, no humming.
7. High efficiency (95%) constant current driver with built in overheat protection that remains stable at a wide range of input voltages.
8. Independent LED circuit prevents complete blackout in case an LED fails.
9. Environmentally friendly, no mercury and no lead.
10. Causes no electromagnetic interference.
11. No UV, no IR
12. Warranty: 3-5 years warranty


  • Hotels
  • Conference & meeting rooms
  • Factories & Offices
  • Commercial purposes
  • Residential & institution buildings
  • Schools, colleges & Universities
  • Hospitals
  • Places where energy saving and high color rendering index lighting are needed.

Product Detailed Images

Heat Dissipation Aluminum Shell

100% of the LED panel light aluminum frame
excellent heat dissipation surface design
smooth touch thin round led panel lights
frosted surface treatment
smooth aluminum real color surface treatment
ivory white surface treatment are available

Light Guide Plate of down panel light

Use the industry brand
high quality particles imported from Germany as raw material
the plate manufactured in Taiwan
remarkably uniform light distribution on the shiny surface
the light is downy not dazzling
high light transmittance
no static electricity
don’t absorb dust

The Backplane of round Panel Lights

100% aluminum material
good heat dissipation
blue protective film
to prevent being scratched thin round led panel lights

LED Brand Chips

Super bright Taiwan brand 3014SMD LEDs
the chip size:10*23MIL

Round Light Panel and Its Accessories

Outside power driver
high quality terminals ensure good contact

Dimensions : ( measured by mm/inch )

round led light 12W UL listed dimension layout

Average Illuminance Figure

round led light 12W UL listed lumen report

Light Source Test Report

round led light 12W UL listed lighting source test

How to install UL listed 12w round led light

how to install round led light 12W UL listed

  • 1.Turn off the power switch.
  • 2.Cut a suitable size hole in ceiling according to mini square led panel light dimension.
  • 3.Screw out the 4 screws on the built-in power supply upper cover.
  • 4.Pull out the upper cover of the power supply towards upright direction.
  • 5.Guide the grid electricity wires into the power supply box,connect the grid electricity wire with power supply wires with screw end cap, and then close the power supply box properly with screws.
  • 6.Push the spring on the led panel light upright and then insert the led panel light base into the ceiling hole, it will aromaticallylock rightly.