High efficiency round led panel light 18W UL approved from China vendor with competitive price, powered by Epistar SMD2835 LED chips, minimum 7 years life span, suitable for US market, hot sale for 2017.
Detailed technical specifications
Rated Power: 18W (Watts)
Working Voltage: 9-24V DC
Beam Angle: 120°
LED Chips: Epistar SMD2835 chip
Color: Warm White ( 2700K-3200K ), Natural White (3900K-4500K ), Cool White ( 5500K-6500K )
Luminous Flux: 1170 lm ( Warm White ), 1202 lm (Natural White), 1265 lm (Cool White)
Enclosure material: Die-casting
Reflector: milk color PMMA
Power factor: >0.9
Saving energy: 50%
Protection Grade: IP40
Warranty: 7 years warranty
Net Weight: 0.53 KGS
1. Safety standard: SAA, RoHs, CE, UL .
2. Normal luminous efficacy with >60lm/w and excellent light uniformity.
3. All sides are lined with LED to ensure optimal illumination.
4. High light output and reduced energy consumption of up to 50%.
5. Over 36’000 hours life expectancy.
1.Certificate No. :E471481
6. No start-up time, no flickering, no humming.
7. High efficiency (95%) constant current driver with built in overheat protection that remains stable at a wide range of input voltages.
8. Independent LED circuit prevents complete blackout in case an LED fails.
9. Environmentally friendly, no mercury and no lead.
10. Causes no electromagnetic interference.
11. No UV, no IR
12. Warranty: 3-5 years warranty
- Conference & meeting rooms
- Factories & Offices
- Commercial purposes
- Residential & institution buildings
- Schools, colleges & Universities
- Places where energy saving and high color rendering index lighting are needed.
Dimensions : ( measured by mm/inch )
Average Illuminance Figure
Light Source Test Report
How to install Round led panel light 18W UL approved
- 1.Turn off the power switch.
- 2.Cut a suitable size hole in ceiling according to mini square led panel light dimension.
- 3.Screw out the 4 screws on the built-in power supply upper cover.
- 4.Pull out the upper cover of the power supply towards upright direction.
- 5.Guide the grid electricity wires into the power supply box,connect the grid electricity wire with power supply wires with screw end cap, and then close the power supply box properly with screws.
- 6.Push the spring on the led panel light upright and then insert the led panel light base into the ceiling hole, it will aromaticallylock rightly.