Round panel light 6w & Die-casting led panel from China exporter at low price, lighted by SMD 2835 Epistar LED chips, minimum 5 years life span, good for Austria market .
Detailed technical specifications
Rated Power: 6W (Watts)
Working Voltage: 100-240V AC
Beam Angle: 120°
LED Chips: Epistar SMD2835 chip
Color: Warm White ( 2750K-3250K ), Natural White (3750K-4250K ), Cool White ( 5750K-6250K )
Luminous Flux: 415 lm ( Warm White ), 422 lm (Natural White), 448 lm (Cool White)
Enclosure material: Die-casting
Reflector: milk color PMMA
Power factor: >0.9
Saving energy: 50%
Protection Grade: IP43
Warranty: 5 years warranty
Net Weight: 0.28 KGS
1. Safety standard: SAA, RoHs, CE
2. Normal luminous efficacy with >60lm/w and excellent light uniformity.
3. All sides are lined with Epistar 2835 LED chips to ensure optimal illumination.
4. High light output and reduced energy consumption up to 50%.
5. Over 36’000 hours life expectancy.
6. No start-up time, no flickering, no humming.
7. High efficiency (95%) constant current driver with built in overheat protection that remains stable at a wide range of input voltages.
8. Independent LED circuit prevents complete blackout in case an LED fails.
9. Environmentally friendly, no mercury and no lead.
10. Causes no electromagnetic interference.
11. No UV, no IR
12. Warranty: 5 years warranty
- Conference & meeting rooms
- Factories & Offices
- Commercial purposes
- Residential & institution buildings
- Schools, colleges & Universities
- Places where energy saving and high color rendering index lighting are needed.
Dimensions : ( measured by mm/inch )
Average Illuminance Figure
Light Source Test Report
How to install 6w round led panel light
- 1.Turn off the power switch.
- 2.Cut a suitable size hole in ceiling according to 6w round led panel dimension.
- 3.Connect the led panel light with the included led panel light power supply,
- 4.Push the spring on the led panel light upright and then insert the led panel light base into the ceiling hole, it will aromatically lock rightly.
- 5.Turn on the power switch.