Wholesale 2×4 led flat panel light 60W & super bright 2700k panel light from China supplier with cheap price, powered by Sanan SMD2835 LED chips, minimum 50000 hours life span.
Detailed technical specifications
Rated Power: 60W (Watts)
Working Voltage: DC36V / AC110-240V
Beam Angle: 120°
LED Chips: super bright Sanan SMD 2835 led chips
Color: Warm White ( 2750K-3250K ), Natural White (3750K-4250K ), Cool White ( 5750K-6250K )
Luminous Flux: 5357 lm ( Warm White ), 5522 lm (Natural White), 5790 lm (Cool White)
Enclosure material: Die-casting
Reflector: milk color PMMA
Power factor: >0.8
Saving energy: 50%
Protection Grade: IP43
Insulation Grade: F
Warranty: 3 years warranty
Net Weight: 10.4 KGS
1. The Luminance uniformity of the emitting surface is over 82%.
2. All sides are lined with super bright Sanan SMD2835 LED chips to ensure optimal illumination.
3. High light output and reduced energy consumption of up to 50%.
4. Over 50’000 hours life expectancy.
5. Wide angle of deflection with even light distribution.
6. No start-up time, no flickering, no humming.
7. High efficiency (95%) constant current driver with built in overheat protection that remains
stable at a wide range of input voltages.
8. Independent LED circuit prevents complete blackout in case an LED fails.
9. Environmentally friendly, no mercury and no lead.
10. Causes no electromagnetic interference.
11. No UV, no IR
12. Warranty: 3 years warranty
- Conference & meeting rooms
- Factories & Offices
- Commercial purposes
- Residential & institution buildings
- Schools, colleges & Universities
- Places where energy saving and high color rendering index lighting are needed.
Super bright 2×4 60W 2700k led flat panel light dimension layout : ( measured by mm/inch )
Super bright 2×4 60W 2700k led flat panel light lm-80 test report
Super bright 2×4 60W 2700k led flat panel light lm-79 light source test report
How to install super bright 2×4 60W 2700k led flat panel light
1.Turn off the power switch.
2.Connect the output-terminal with utility power(AC 100-240V) by using wiring unit, make certain that no copper wire is bared.
3. Connect the output-terminal DC plug of current driver with the lamp’s DC plug, insure this connection secure.
4.Put the super bright 2×4 60W 2700k led flat panel light and current driver to the suitable place by convenient installation.
5.Turn on the power switch.