High brightness led 1×4 panel light 42W & Super bright led licht panel from China professional manufacturer , minimum 10 years working life, suits for high end market and places where high brightness lighting environment needed.
Detailed technical specifications
Rated Power: 42W (Watts)
Working Voltage: DC 36V / AC110-240V
Beam Angle: 120°
LED Chips: High brightness Epistar SMD 2835 led chips
Color: Warm White ( 2750K-3250K ), Natural White (3750K-4250K ), Cool White ( 5750K-6250K )
Luminous Flux: 3999 lm ( Warm White ), 4120 lm (Natural White), 4323 lm (Cool White)
Enclosure material: Die-casting
Reflector: milk color PMMA
Power factor: >0.8
Saving energy: 50%
Protection Grade: IP43
Insulation Grade: F
Warranty: 3 years warranty
Net Weight: 4.3 KGS
1. The Luminance uniformity of the emitting surface is over 82%.
2. All sides are lined with high brightness Epistar SMD 2835 led chips to ensure optimal illumination.
3. High light output and reduced energy consumption of up to 50%.
4. Over 50’000 hours life expectancy.
5. Wide angle of deflection with even light distribution.
6. No start-up time, no flickering, no humming.
7. High efficiency (95%) constant current driver with built in overheat protection that remains
stable at a wide range of input voltages.
8. Independent LED circuit prevents complete blackout in case an LED fails.
9. Environmentally friendly, no mercury and no lead.
10. Causes no electromagnetic interference.
11. No UV, no IR
12. Warranty: 3 years warranty
- Conference & meeting rooms
- Factories & Offices
- Commercial purposes
- Residential & institution buildings
- Schools, colleges & Universities
- Places where energy saving and high color rendering index lighting are needed.
super bright led 1×4 panel light 42W led licht panel dimension layout : ( measured by mm/inch )
super bright led 1×4 panel light 42W led licht panel lm-80 test report
super bright led 1×4 panel light 42W led licht panel lm-79 light source test report
How to install super bright led 1×4 panel light 42W led licht panel
1.Turn off the power switch.
2.Connect the output-terminal with utility power(AC 100-240V) by using wiring unit, make sure that no copper wire is bared.
3. Connect the output-terminal DC plug of current driver with the lamp’s DC plug, insure this connection secure.
4.Put the super bright led 1×4 panel light 42W led licht panel and current driver to the suitable place by convenient installation.
5.Turn on the power switch.