Wholesale 2×2 light fixture 48W & ultra bright led panel for New Zealand from Loevet lighting, lighted by Sanan LED chips, 5 years warrant, suitable for Amazon seller and other medium sized wholesaler.
Detailed technical specifications
Rated Power: 48W (Watts)
Working Voltage: DC 36V / AC110-240V
Beam Angle: 120°
LED Chips: ultra bright Sanan SMD2835 led chips
Color: Warm White ( 2750K-3250K ), Natural White (3750K-4250K ), Cool White ( 5750K-6250K )
Luminous Flux: 4355 lm ( Warm White ), 4488 lm (Natural White), 4708 lm (Cool White)
Enclosure material: Die-casting
Reflector: milk color PMMA
Power factor: >0.9
Saving energy: 50%
Protection Grade: IP43
Insulation Grade: F
Warranty: 3 years warranty
Net Weight: 4.6 KGS
1. The Luminance uniformity of the emitting surface is over 80%.
2. All sides are lined with ultra bright Sanan SMD2835 led chips to ensure optimal illumination.
3. High light output and reduced energy consumption of up to 50%.
4. Over 50’000 hours life expectancy.
5. Wide angle of deflection with even light distribution.
6. No start-up time, no flickering, no humming.
7. High efficiency (95%) constant current driver with built in overheat protection that remains
stable at a wide range of input voltages.
8. Independent LED circuit prevents complete blackout in case an LED fails.
9. Environmentally friendly, no mercury and no lead.
10. Causes no electromagnetic interference.
11. No UV, no IR
12. Warranty: 3 years warranty
- Conference & meeting rooms
- Factories & Offices
- Commercial purposes
- Residential & institution buildings
- Schools, colleges & Universities
- Places where energy saving and high color rendering index lighting are needed.
ultra bright 2×2 led panel light fixture 48W dimension layout : ( measured by mm/inch )
ultra bright 2×2 led panel light fixture 48W lm-80 test report
ultra bright 2×2 led panel light fixture 48W lm-79 light source test report
How to install ultra bright 2×2 led panel light fixture 48W
1.Turn off the power switch.
2.Connect the output-terminal with utility power(AC 100-240V) by using wiring unit, make certain that no copper wire is bared.
3. Connect the output-terminal DC plug of current driver with the lamp’s DC plug, insure this connection secure.
4.Put the 48w ultra bright 2×2 led panel light fixture and current driver to the suitable place by convenient installation.
5.Turn on the power switch.