1200×600 led panel 54W & unified glare rating UGR led panel light from China manufacturer for commercial lighting, minimum 10 years working life, powered by Epistar SMD2835 LED chips.
Detailed technical specifications
Rated Power: 54W (Watts)
Working Voltage: DC 36V / AC110-240V
Beam Angle: 100°
LED Chips: High quality Epistar SMD2835 led chips
Color: Warm White ( 2750K-3250K ), Natural White (3750K-4250K ), Cool White ( 5750K-6250K )
Luminous Flux: 5978 lm ( Warm White ), 4492 lm (Natural White), 4711 lm (Cool White)
Enclosure material: Die-casting
Reflector: milk color PMMA
Power factor: >0.9
Saving energy: 50%
Protection Grade: IP43
Insulation Grade: F
Warranty: 3 years warranty
Net Weight: 9.5 KGS
1. The Luminance uniformity of the emitting surface is over 80%.
2. All sides are lined with high quality Epistar SMD2835 led chips to ensure optimal illumination.
3. High light output and reduced energy consumption of up to 50%.
4. Over 50’000 hours life expectancy.
5. Wide angle of deflection with even light distribution.
6. No start-up time, no flickering, no humming.
7. High efficiency (95%) constant current driver with built in overheat protection that remains
stable at a wide range of input voltages.
8. Independent LED circuit prevents complete blackout in case an LED fails.
9. Environmentally friendly, no mercury and no lead.
11. No UV, no IR
12. Warranty: 3 years warranty
- Conference & meeting rooms
- Factories & Offices
- Commercial purposes
- Residential & institution buildings
- Schools, colleges & Universities
- Places where energy saving and high color rendering index lighting are needed.
Unified glare rating 1200×600 54w UGR led panel light dimension layout : ( measured by mm/inch )
Unified glare rating 1200×600 54w UGR led panel light lm-80 test report
Unified glare rating 1200×600 54w UGR led panel light lm-79 light source test report
How to install Unified glare rating 1200×600 54w UGR led panel light
1.Turn off the power switch.
2.Connect the output-terminal with utility power(AC 100-240V) by using wiring unit, make certain that no copper wire is bared.
3. Connect the output-terminal DC plug of current driver with the lamp’s DC plug, insure this connection secure.
4.Put the unified glare rating 1200×600 54w UGR led panel light and current river to the suitable place by convenient installation.
5.Turn on the power switch.